Exterior Parts

---

CLAPBOARD   $ - $$$

Double 4"  $

Double 5"  (usually a Special Order)  $$$

6"  (Hard to find)

7"  Usually Special Order from "Certainteed"   $$$

    Typically referred to as 'Single 7'

    Features insulated backing for rigidity

DUTCH LAP    $ - $$

Format:

Double 4"   $

Double 5"  (usually a Special Order)  $$ 

BOARD & BATTEN     $$$

Purchased by 'Width between Verticals'

12" most popular...only by "Certainteed"    

HARDI BOARD   $$$$

Cement Board Product that can mimic any style or height* of each board.

Requires certified installer to maintain warranty.

*Height  (section of the board that is visible) is referred to as 'EXPOSURE".

Typical 'exposure' is 6-7" but can be as low as 5" and as high as 10"

BRICK   $$$$$$

***Requires a Modified Foundation called a 'BRICK SHELF'.

The foundation, anywhere from  8" - 10" to support the house,  needs to be wider by another 4" to separately support the weight of the brick wall.

There is a product known as 'Thin Brick" that does NOT require a brick shelf...

It is made by taking a brick and cutting its face off to about 1/2" thick.

It is then mounted on a track 

STUCCO    $$$ - $$$$$

There are (2) types of Stucco:

•  EIFS
• Cement Base

EIFS, or Exterior Insulation and Finish Systems, is a lightweight, insulated cladding system that provides a water-resistant surface, while traditional stucco is a heavier, non-insulating material made from cement, sand, and lime. Although they may look similar, EIFS offers better energy efficiency and moisture control compared to